Nice HOPPKIT pro motorization kit for double-leaf gates up to 4.8m and 400kg - HOPPBDKCE

HOPPKIT professional motorization kit for 2-leaf gates from NICE. This motorization is intended for residential use. It can support swing gates up to 400 kg and measuring up to 4.8 meters, or 2.4 meters per leaf.
230 Volt power supply and 24 Volt motor.

This ready-to-install kit includes everything you need for your gate: two electromagnetic operators, two remote controls, a pair of photocells and a flashing light.

You will then be able to manage your swing gate remotely .

Features of the HOPPKIT Kit:

Locking motors with mechanical stops with millimetric adjustment in opening and closing
closing: with integrated control logic (HO7124) and without logic (HO7224).

Powerful thanks to the torque of 250 Nm.

Durable and compact : 180 mm wide, ideal for any pillar. Compact, shock-resistant shell with aluminum base.

Robust aluminum anti-shear arm.

Easy to install : thanks to the new mounting bracket with quick release for the motor. No welding required.

Advanced electronics with integrated control logic , only 3 keys to manage programming operations:

Obstacle detection and possibility of connection to the 8.2 kΩ sensitive edge, photocell test

Automatic diagnosis of anomalies

Memorization of the opening and closing limit switches in self-learning mode

Possibility to configure the stop input in self-learning, NO, NC and latest generation resistive sensitive edges 8.2 kΩ

Slowdown in opening and closing

Possibility to easily connect additional pairs of photocells, photo2

Programming break time

Full opening of a single leaf and partial opening

Clutch with anti-crush safety.

Energy saving and no risk of interruption: 3 standby modes to reduce mains electricity consumption, or supplied by a battery if connected to the Solemyo Kit.

Operation also in the absence of power thanks to optional batteries (PS124).

Everything is always under control : thanks to the pre-equipment for the OperaBUST4 system, it is possible to use the unit to increase the possibilities of programming, control and diagnostics of the automation on site and remotely.

Technical specifications of the control logic:

- Simple programming
- Self-learning of opening and closing limit switches
- Automatic diagnosis of anomalies
- Programming break time
- Pedestrian opening as a second function
- Slowdown in opening and closing

Technical specifications of the HOPPKIT articulated arm:

- Power supply: 230 Volts (on the control logic, motors in 24 Volts)
- Intensity: 0.8 Ampere
- Power: 280 Watts
- Speed: 1.68 rpm
- Torque: 250 Nm
- Work cycle (max per hour): 35
- Protection index: IP 44
- Optimal operating temperature: -20°C to +50°C
- Dimensions: 167 x 254 x 315 mm
- Weight: 22 kg

Kit Contents:

- 2 Nice HO7124 electromechanical operators (with control logic and OXIBD plug-in receiver ) + HO7224 (without control logic)

- 2 Nice 2-channel 433 Mhz ON2E or MYGO4 remote controls

- 1 pair of surface-mounted photocells, ready for blueBUS connection. EPMB

- 1 flashing light with integrated ELDC antenna

Note: Obtain the instructions by scanning the QR Code on the packaging.